3D Print Lab
Ultimaker S3
Technology: FDM(Fused deposition modeling)
Build Volume: 230 x 190 x 200 mm
Minimum Layer Height: 20 microns Max.
Printing Speed: > 24 mm3/s
Supported Materials: PLA, ABS, Nylon, CPE, PC, PP, TPU, PVA
Creality 3DPrintMill
Technology: FDM
Build Volume: 200 * 170 * ∞(Infinite-Z-axis for Endless Printing) mm
Minimum Layer Height: 0.1mm
Supported Materials: PLA / TPU / PETG
Prusa I3 MK3S
Technology: SLA(Stereolithography Apparatus)
Build Volume: 145 x 145 x 175 mm
Minimum Layer Height: 25 microns
Max. Printing Speed: 1-3 cm/h
Supported Materials: Photopolymer resin
Cerambot Pro
Technology: FDM(Fused deposition modeling)
Build Volume: 170 x 170 x 285 mm
Minimum Layer Height: 0.1 mm
Max. Printing Speed: > 50 mm/s
Supported Materials: Kaolinite HAP and other pastes
Cerambot Eazao Zero
Technology: DIW (Direct Ink Writing)
Build Volume: 150 x 150 x 240 mm
Minimum Layer Height: 0.4mm
Max. Printing Speed: 40mm/s
Supported Materials: Porcelain, Clay etc
Formlabs form 1+
Technology: SLA(Stereolithography Apparatus)
Build Volume: 125 × 125 × 165 mm Minimum Layer Height: 25 microns
Supported Materials: Liquid Plastic Resin
Formlabs form 2
Technology: SLA(Stereolithography Apparatus)
Build Volume: 145 x 145 x 175 mm
Minimum Layer Height: 25 microns
Max. Printing Speed: 1-3 cm/h
Supported Materials: Photopolymer resin
Delta WASP 2040 INDUSTRIALX
Technology:
Build Volume:
Minimum Layer Height:
Max. Printing Speed:
Supported Materials: PLA, ABS, PETG, TPU, TPE, Polypropylene, Polycarbonate, PC+ABS, PPS, PMMA, PVA, PA
3D Scanners Lab
RangeVision Spectrum 3d Scanner „3-in-one“ scanner:
Three scanning zones to capture different-sized objects from 1 cm up to 3 m.
3.1 Mpx industrial cameras: For highly detailed and full-colour scans.
Three scan modes: To render complex geometry of objects of any size and shape
Sense 3D Scanner
Dimensions 7 inches x 5 inches x 1.2 inches (17.8 cm x 12.9 cm x 3.3 cm)
Scan volume Min: 7.8 inches x 7.8 inches x 7.8 inches (20 cm x 20 cm x 20 cm) Max: 9.8 feet by 9.8 feet x 9.8 feet
(3 m
x 3 m x 3 m
Microscopes Lab
Phio Microscope
5 Megapixel Camera (2592 ⨯ 1944 px)
10 mm2 field of view (3.7 ⨯ 2.7 mm)
Main material: anodized aluminum
Rubberized magnetic feet (stacking)
LED: red, 630 nm
Mini-USB (power & data)
Compatible with all standard flasks (T25, T75) and multiwell plates (6 - 96 wells) from typical manufacturers
(Sarstedt,
Greiner, Eppendorf, Corning, Falcon, TPP…)
BestScope BS-2092 Inverted Biological Microscope
Excellent optical function with infinite optical system.
DSLR(Digital Single Lens Reflex) and microscope digital camera can be used together for image and video capture.
Innovative stand structure, sharp image display, convenient and special for viewing incubating cell tissue.
With LWD Infinite Plan Objective, Making Viewing Field Flatter and Brighter, Contrast Sharper, Living Cell Observing
easier.
Advanced and Reliable Mechanical Stage with Knob Height and Tightness Adjustable.
With pre-centerable Phase Annulus, Available to Observe Low Contrast or Transparent Specimens
972 Series Reflected (and Transmitted) Light Microscope
Total magnification: 50x – 400x (with WF10x eyepieces)
Eyepieces: WF10x, paired
Objectives: 5x, 10x, 20xR, 40xR
Focus system: coaxial coarse & fine focusing mechanism
Stage: double layer mechanical, travel range of 75 mm x 50 mm
Condenser: N.A. 1.25 (for 972RT), rack & pinion adjustment, with field diaphragm, aperture diaphragm and
polarizer
Illumination: 6V 20W halogen with brightness control
Electronic Lab
Siglent SDS 1202X-E Digital Oscilloscope
Bandwidth: 200 MHz
Channels: 2
Real time sampling rate: 1 GSa/s
Maximum capture rate: (100,000 in Normal mode,
400,000 in Sequence mode) Memory depth: 14 Mpts
Siglent SDG 1062X Waveform Generator
Max output frequency: 60 MHz
Max sampling rate: 150 MSa/s
Vertical resolution: 14-bit
Wave length: 16 kpts
Channels: 2 CH
Siglent SPD 3303X-E Power Supply
Channel output:
CH1: output voltage 0~32 V output current 0~3.2 A
CH2: output voltage 0~32 V output current 0~3.2 A
CH3: output voltage 2.5/3.3/5.0 V output current 0~3.2 A
Display: 4.3″ color TFT-LCD 4 digits voltage display, 3 digits current display
Resolution: 10 mV,10 mA
Setting accuracy: voltage: ±(0.5% of reading+2 digits); current: ±(0.5% of reading+2 digits)
Readback accuracy: voltage±(0.5% of reading+2 digits); current±(0.5% of reading+2 digits)
Weller WE 1010 Soldering stations
Using ET soldering tips
70 W solder iron with ergonomic handle and providing toolless tip change
Password-protected to preserve settings
ESD safe station, iron and heat-resistant silicon cable for safe handling
Power unit, 1 channel with soldering iron WEP 70 and safety rest PH 70
Standby mode and auto setback conserves energy, protects equipment
Raspberry Pi 3 B+ & Pi Zero W
Pi 3 B+
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
Extended 40-pin GPIO header
Full-size HDMI
4 USB 2.0 ports
CSI camera port for connecting a Raspberry Pi camera
DSI display port for connecting a Raspberry Pi touchscreen display
4-pole stereo output and composite video port
Micro SD port for loading your operating system and storing data
5V/2.5A DC power input
Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Pi Zero W
802.11 b/g/n wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)
1GHz, single-core CPU
512MB RAM
Mini HDMI and USB On-The-Go ports
Micro USB power
HAT-compatible 40-pin header
Composite video and reset headers
CSI camera connector
Arduino Mega
8-bit board
54 digital pins,
16 analog inputs
4 serial ports
Other Equipment
Voltmeters
AR/VR Lab
Oculus Quest 2
Panel Type: Single Fast-Switch LCD, 1832×1920px per eye
Supported Refresh Rate: 72Hz (default), can be configured to 60Hz in some cases
Default SDK Color Space: Rec.2020 gamut, 2.2 gamma, D65 white point
CIE 1931 xy color-primary values:
Red : (0.708, 0.292)
Green: (0.17, 0.797)
Blue : (0.131, 0.046)
White: (0.3127, 0.3290)
USB Connector: 1x USB-C
Tracking: Inside out, 6DOF
Audio: Integrated, in-strap
CPU: Qualcomm® Snapdragon XR2 Platform
CPU Notes: Developers have access to 3 gold cores
Memory: 6GB total
Lens Distance: Adjustable - 3 preset IPD adjustments
Oculus Rift
Panel Type: Dual OLED 1080x1200
Supported Refresh: 90Hz
Native Color Space: Between Adobe RGB and DCI-P3 gamut, 2.2 gamma, D75 white point
CIE 1931 xy color-primary values:
Red : (0.666, 0.334)
Green: (0.238, 0.714)
Blue : (0.139, 0.053)
White: (0.298, 0.318)
Default SDK Color Space: Same as native color space, linear gamma (or native sRGB)
Display Connector: HDMI 1.3
USB Connector: Minimum 2x USB 3.0. Additional tracking sensors allowed on USB 2
Tracking: Outside in - 6DOF,
Audio: Integrated over-ear headphones and microphone
Lens Distance: Adjustable
Drone Lab
DJI Mini
Takeoff Weight : 249 g
Dimensions
Folded: 140×81×57 mm (L×W×H)
Unfolded: 159×202×55 mm (L×W×H)
Unfolded (with propellers): 245×289×55 mm (L×W×H)
Max Flight Time: 30 min
Camera Sensor: 1/2.3” CMOS Effective Pixels: 12 MP
Software Tools
Altium Designer
Altium Designer enables engineers to effortlessly connect with every facet of the electronics design process.
Over 35 years of innovation and development focused on a truly unified design environment makes it the most widely
used
PCB design solution.
AI Lab
10 windows workstations
10 Linux workstations
Linux server
